Synergic inverter Spartus MasterMIG 250PFC SYNERGY welder, 250A, 230V
Synergic inverter Spartus MasterMIG 250PFC SYNERGY welder, 250A, 230V
Code: MasterMIG250PFCsynergy_easyPrice 1603 € VAT incl.(1324.79 € VAT excl.)-
Input
~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]
25 – 250
Duty cycle MIG [%]
60
Output working voltage MIG [V]
26,5
Wire feeding speed [m/min]
2,5 – 16,5
Wire feeder
built-in, 4-roll gear
Welding wire spool [kg]/[mm]
≤ 15 / ∅300
Wire diameter ∅ [mm]
0.6 / 0.8 / 1.0 / 1.2
Synergic
Yes
Synergic programs
20 dedicated
Inductance control
0 - 10
Brazing (CuSi)
Yes
Slow feed
0 - 10
Burnback
0 - 10
2T/4T Control
Yes
TIG DC welding
Yes
Welding current TIG [A]
10 – 250
Duty cycle TIG [%]
60
Down slope [s]
0 – 10
Post-gas [s]
0 - 10
Arc ignition
LIFT
MMA welding mode
Yes
Welding current MMA [A]
10 – 250
Duty cycle MMA [%]
60
ARC FORCE
0 - 10
HOT START
0 - 10
No-load voltage [V]
14
PFC
Yes
Current consumption [A]
27
Power factor (cosφ)
0,99
Efficiency η [%]
85
Insulation class
H
Protection class
IP23
Weight [kg]
25
Dimensions [mm]
620 × 240 × 450
SPARTUS® MasterMIG 250PFC SYNERGY is a professional, portable, multi-process welding semi-automatic device. It enables MIG/MAG, TIG and MMA welding with maximum welding current of 250A. The unit is powered from a single-phase network 230V.
The device was produced with using of modern solutions such as inverter technology, IGBT power transistors, MCU controller, PWM technology, PFC filter. All of our technology solutions provide stable output performance under a variety of conditions, which has a direct effect on outstanding arc characteristics and welded joint quality.
The device has a number of functions that support MIG / MAG welding processes:
- Synergistic MIG/MAG welding mode: 20 dedicated programmes.
- Wave Control - precise arc dynamics adjustment Wave control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion.
- Burn Back - precise adjustment of welding wire burning speed allows limit a risk of sticking the welding wire to the contact tip.
- Slow Feed - so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld.
- 2T / 4T - Choice of one of two operating modes.
- Spool Gun - possibility of welding with type Spool Gun welding holder.
The SPARTUS® MasterMIG 250PFC Synergy also has a number of features that support TIG welding processes (2T/4T mode, current falling speed adjustment, post-gas) and MMA (Hot Start for easier electrode ignition, Arc Force for easier welding in forced positions, VRD lower no-load voltage). Functional panel is equipped with a 480x320px colour LCD with an intuitive user interface. It is possible to choose one of several language versions of the control software (English, German, Czech, Slovak, Lithuanian, Spanish, Portuguese, Russian, French, Serbian, Polish). By default, the Polish language version of the interface is set.
SPARTUS® MasterMIG 250PFC SYNERGY is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.
Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), muffler welding, production sector, light industry.Packages:
Basic
- Device SPARTUS® MasterMIG 250PFC SYNERGY
- 3m work clamp
- Gas hose
- User's manual
Ultimate
- Device SPARTUS® MasterMIG 250PFC SYNERGY
- MIG gun SPARTUS® SPM 240
- 3m electrode holder
- 3m work clamp
- Gas hose
- User's manual
-
MIG/MAG SPARTUS® MasterMIG 250W DUAL PULSE SYNERGY welderCode: MasterMIG250WdualPulseSynergy2925 € - 3190 € VAT incl.MIG/MAG SPARTUS® EasyMIG 210S inverter welderCode: EasyMIG210S_basic338 € VAT incl.
408.62 €You save 70.62 €