MIG/MAG SPARTUS® MasterMIG 250W DUAL PULSE SYNERGY welder

  • MIG/MAG SPARTUS® MasterMIG 250W DUAL PULSE SYNERGY welder

    Code: MasterMIG250WdualPulseSynergyBasic
    Price 2925  VAT incl.
    (2417.36  VAT excl.)
    Manufacturer
    MIG power supply voltage
    400V
    MIG type
    Synergic
    MIG pulse (with pulses)
    Yes
  • Input 

    ~3× 400V ± 10% 50 / 60 Hz

    Welding current MIG [A]

    15 – 250

    Duty cycle

    60[%] 250[A] 100[%] 195[A]

    Output working voltage MIG [V]

    14.8 – 26.5

    Wire feeder

    built-in, 4-roll gear

    Wire feeding speed [m/min]

    1,5 – 24

    Wire diameter ∅ [mm]

    0.8 / 1.0 / 1.2

    Synergic MIG/MAG programs

     

    1P - with pulse

    17 programs

    2P - with dual pulse

    17 programs

    SYNERGY - without pulse

    14 programs

    Pulsation/dual pulsation

     

    Dual pulse regulation

     

    dPC (pulse current delta)

    10 – 200[A]

    FdP (Frequency 2P)

    0,5 – 3,0[Hz]

    dut (double pulsation width)

    10 – 90[%]

    bAL (arc length of the current)

    -10 – +10

    Spot welding

     

    Welding inductance adjustment

    Wave Control

    Operating mode

    2T/4T/s4T

    Operating mode s4T

     

    SCP (initial current)

    10 – 200[%]

    SAL (initial current arc length)

    -10 – +10

    ECP (final current)

    10 – 200[%]

    EAL (final current arc length)

    -10 – +10

    Slow Feed

     

    Burn Back

     

    Pre-Gas/Post-Gas

     

    SPOOL GUN

     

    TIG welding current [A]

    10 – 250

    Arc ignition

    Lift

    Time of current descent [s]

    0 – 10

    Welding with MMA coated electrode

     

    MMA welding current [A]

    10 – 250

    Arc Force/Hot Start

     

    VRD

     

    Current consumption [A]

    MIG 15,1/ MAG 18,2/ TIG 13,3

    Power factor (cosφ)

    0,70

    Efficiency η [%]

    85

    Insulation class

    H

    Protection class

    IP23

    Weight [kg]

    62,6

    Dimensions [mm]

    1100 × 580 × 700

    SPARTUS® MasterMIG 250 Dual Pulse Synergy is a modern multi-functional inverter device for welding with MIG/MAG, TIG and MMA methods. During its production, modern technologies were used, such as: IGBT transistors, PWM, MCU control system. The device is powered from a 400V three-phase network and enables welding with a current of up to 250A for all three methods.

    MasterMIG 250 Dual Pulse Synergy have a number of modern functions necessary for high-performance and high-quality MIG/MAG welding of materials such as steels, stainless steels, acid-resistant steels and aluminum alloys. It will be used especially when welding aluminum and its alloys, thanks to the use of advanced functions, dedicated to welding demanding alloys.

    The most important functions:

    Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), silencer welding, production sector, light industry.

    •1P (Pulse) - MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc

    •2P (Dual Pulse) - MIG/MAG welding with double pulsation

    •Welding in two operating modes 2T/4T

    •Spot welding

    The use of double pulsation in the MIG/MAG method allows obtaining a weld of quality and aesthetics comparable to the TIG method. The benefits of using double pulsation in the MIG/MAG method:

    •High aesthetics (husk effect)

    •Higher welding efficiency compared to the TIG method

    •Smaller thermal deformations compared to the TIG method

    •When welding aluminum requires less skill from the operator in relation to the TIG method

    Simple to use and intuitive function panel allows precise control of parameters for MIG/MAG, TIG and MMA methods. For the MIG/MAG methods it is possible to smoothly adjust the welding parameters such as: welding voltage, wire feed speed, inductance. In addition, the device is equipped with synergic programs in which the parameters are programmed - according to the welding mode and the material being welded.

    MasterMIG 250 Dual Pulse Synergy is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.

    Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), muffler welding, production sector, light industry, high-performance aluminum welding.

     

    Packages:

    Basic

    • Device SPARTUS® MasterMIG 250W Dual Pulse Synergy
    • Cooler
    • Driving set
    • 3m work clamp
    • Gas hose
    • User's manual

      Ultimate

    • Device SPARTUS® MasterMIG 250W Dual Pulse Synergy
    • Cooler
    • Driving set
    • MIG gun SPARTUS® SPM 241LCD
    • 3m electrode holder
    • 3m work clamp
    • Gas hose
    • User's manual 
  • 617  - 877  VAT incl.
    1603  - 1858  VAT incl.
    262  VAT incl.
    333  VAT incl.
    199  VAT incl.
    1800  VAT incl.
    2220  You save 420 
    338  VAT incl.
    408.62  You save 70.62 
    440  VAT incl.
    Sold out Contact us
    585  - 840  VAT incl.
    650  VAT incl.